Analytical laboratory comparison of major and minor constituents in an active crater lake

info:eu-repo/semantics/published

Grand Junction operations office analytical laboratory handbook of analytical methods /

"A.E.C. Contract AT(05-1)-636."

Essential steps to providing reliable results using the Analytical Quality Assurance Cycle

Considering how demand for quality assurance (QA) has grown in analytical laboratories, we show the trends in analytical science, illustrated through international standard ISO/IEC 17025, validation, measurements of uncertainty, and quality-control (QC) measures. A detailed review of the history of analytical chemistry indicates that these concepts are consistently used in laboratories to demonstrate their traceabilities and competences to provide reliable results. We propose a new approach for laboratory QA, which also develops a diagram to support routine laboratories (which generally apply a quality system, such as ISO/IEC 17025) or research laboratories (that have some difficult applying this international standard). This approach, called the Analytical Quality Assurance Cycle (AQAC), presents the major QA concepts and the relationships between these concepts in order to provide traceability and reliable results. The AQAC is a practical tool to support the trend towards QA in analytical laboratories. (C) 2012 Elsevier Ltd. All rights reserved.

Handbook of analytical procedures /

At head of title: United States Atomic Energy Commission, Grand Junction Operations Office, Analytical Laboratory.

Handbook of analytical procedures : supplement to RMO 3001, Rev. No. 1 /

"Western Uranium Project, Lucius Pitkin, Inc., USAEC Contract No. AT(05-1)-912 contractor for the U.S. Atomic Energy Commission, Grand Junction, Colorado."

Development of descriptor tools for the characterization of Australian sugar mill evaporator scale

Cleaning of sugar mill evaporators is an expensive exercise. Identifying the scale components assists in determining which chemical cleaning agents would result in effective evaporator cleaning. The current methods (based on x-ray diffraction techniques, ion exchange/high performance liquid chromatography and thermogravimetry/differential thermal analysis) used for scale characterisation are difficult, time consuming and expensive, and cannot be performed in a conventional analytical laboratory or by mill staff. The present study has examined the use of simple descriptor tests for the characterisation of Australian sugar mill evaporator scales. Scale samples were obtained from seven Australian sugar mill evaporators by mechanical means. The appearance, texture and colour of the scale were noted before the samples were characterised using x-ray fluorescence and x-ray powder diffraction to determine the compounds present. A number of commercial analytical test kits were used to determine the phosphate and calcium contents of scale samples. Dissolution experiments were carried out on the scale samples with selected cleaning agents to provide relevant information about the effect the cleaning agents have on different evaporator scales. Results have shown that by simply identifying the colour and the appearance of the scale, the elemental composition and knowing from which effect the scale originates, a prediction of the scale composition can be made. These descriptors and dissolution experiments on scale samples can be used to provide factory staff with an on-site rapid process to predict the most effective chemicals for chemical cleaning of the evaporators.

Development of descriptor tools for the characterisation of Australian sugar mill evaporator scale

Cleaning of sugar mill evaporators is an expensive exercise. Identifying the scale components assists in determining which chemical cleaning agents would result in effective evaporator cleaning. The current methods (based on x-ray diffraction techniques, ion exchange/high performance liquid chromatography and thermogravimetry/differential thermal analysis) used for scale characterisation are difficult, time consuming and expensive, and cannot be performed in a conventional analytical laboratory or by mill staff. The present study has examined the use of simple descriptor tests for the characterisation of Australian sugar mill evaporator scales. Scale samples were obtained from seven Australian sugar mill evaporators by mechanical means. The appearance, texture and colour of the scale were noted before the samples were characterised using x-ray fluorescence and x-ray powder diffraction to determine the compounds present. A number of commercial analytical test kits were used to determine the phosphate and calcium contents of scale samples. Dissolution experiments were carried out on the scale samples with selected cleaning agents to provide relevant information about the effect the cleaning agents have on different evaporator scales. Results have shown that by simply identifying the colour and the appearance of the scale, the elemental composition and knowing from which effect the scale originates, a prediction of the scale composition can be made. These descriptors and dissolution experiments on scale samples can be used to provide factory staff with an on-site rapid process to predict the most effective chemicals for chemical cleaning of the evaporators.

O laboratório analítico: a psicologia de C.G. Jung examinada pela teoria do ator-rede

O psiquiatra suíço Carl Gustav Jung (1875-1961) é um dos principais nomes da psicologia e da psicoterapia do século XX. Algumas de suas maiores contribuições teórico-metodológicas são as idéias de realidade psíquica, complexo, arquétipo (inconsciente coletivo), processo de individuação, método dialético, método construtivo e imaginação ativa. A psicologia analítica de Jung, ao longo de sua formação, foi influenciada por diversas disciplinas, dentre elas a etnologia (ciências sociais). Este trabalho buscou dar continuidade a este processo de construção epistêmica, mediante exame das concepções de Jung por intermédio da teoria do ator-rede (TAR), uma importante corrente da sociologia contemporânea. Pretendeu-se também saber se a psicologia analítica se mantém atual ou se já é uma teoria e prática clínica anacrônicas. O principal autor relacionado à TAR a quem se recorreu neste trabalho foi o sociólogo francês Bruno Latour. De sua perspectiva, o acordo moderno, disjuntor de Natureza e Cultura, é insuficiente para explicar a complicação inerente às entidades que compõem a realidade. Para escapar das armadilhas conceptuais da modernidade, Latour opera com constructos tais como coletivo (social), ator-rede, proposição, vínculo e plasma. Além do pensamento de Latour, este trabalho valeu-se das idéias sociológicas de Gabriel Tarde e da influenciologia etnopsicanalítica de Tobie Nathan, aproveitando-se da afinidade teórica que compartilham com Latour. Nathan, por desenvolver uma prática em psicoterapia, permitiu propor à psicologia clínica de Jung determinadas questões que o enfoque mais estritamente sociológico de Latour não possibilitava. Uma vez expostas as concepções de Latour, Tarde e Nathan, apresentaram-se os elementos da psicologia analítica com os quais se esperava que elas fossem compatíveis. Concluiu-se que, apesar das diferenças, muitas aproximações são plausíveis entre psicologia analítica e TAR. Constatou-se que a concepção de Jung de um psiquismo multifacetado, em devir, cujos componentes se relacionam de diferentes maneiras, é comparável à noção de ator-rede trabalhada por Latour e à monadologia de Tarde. Verificou-se também que a abordagem pragmática e construtiva identificada na psicoterapia junguiana é em muitos aspectos análoga à prática da etnopsicanálise. Assim, foi possível afirmar que a TAR e a psicologia analítica podem formar aliança.

Review of bio-particle manipulation using dielectrophoresis

During the last decade, large and costly instruments are being replaced by system based on microfluidic devices. Microfluidic devices hold the promise of combining a small analytical laboratory onto a chip-sized substrate to identify, immobilize, separate, and purify cells, bio-molecules, toxins, and other chemical and biological materials. Compared to conventional instruments, microfluidic devices would perform these tasks faster with higher sensitivity and efficiency, and greater affordability. Dielectrophoresis is one of the enabling technologies for these devices. It exploits the differences in particle dielectric properties to allow manipulation and characterization of particles suspended in a fluidic medium. Particles can be trapped or moved between regions of high or low electric fields due to the polarization effects in non-uniform electric fields. By varying the applied electric field frequency, the magnitude and direction of the dielectrophoretic force on the particle can be controlled. Dielectrophoresis has been successfully demonstrated in the separation, transportation, trapping, and sorting of various biological particles.

Effects of water flow on ablation rate and morphological changes in human enamel and dentin after Er:YAG laser irradiation

Purpose: To investigate the laboratory effect of Er:YAG laser on ablation rate and morphological changes in human enamel and dentin with varying water flow. Methods: 23 human third molars were sectioned in mesio-distal and buccal-lingual directions. The slabs were flattened and weighted on an analytical laboratory balance (control). A 4-mm(2) area was demarcated and the samples were randomly assigned into three groups according to water flow employed during the laser irradiation (1.0, 1.5, and 2.0 mL/minute). An Er:YAG laser was used to ablate enamel (80.22-J/cm(2), 300 mJ/4Hz) and dentin (96.26-J/cm(2), 250 mJ/4Hz). After irradiation, the samples were immersed in distilled water for 1 hour and then weighted again. The final mass was obtained and laser-irradiated substrate mass loss was calculated by the difference between the initial and final mass. Afterwards, specimens were prepared for SEM. Results: Data were submitted to ANOVA and Tukey's test (P< 0.05). It was observed that the 2.0 mL/minute resulted in a higher mass loss, 1.0 mL/minute showed a lower mass loss, and 1.5 mL/minute demonstrated intermediate results (P< 0.05). The increase of water flow promoted less melting areas and cracks. Furthermore, dentin was more ablated than enamel. It may be concluded that the water flow of Er:YAG laser and the substrates affected the ablation rate. Among the tested parameters, 2.0 mL/minute improved the ability of ablation in enamel and dentin, with less morphologic surface alteration. (Am J Dent 20 12;25:332-336).

Obtención de un estándar secundario de cuantificación para la síntesis y purificación de allicina.

Desde tiempos ancestrales, el ajo (Allium sativum L.) ha sido utilizado para la prevención y el tratamiento de dolencias. Sus efectos benéficos para la salud han sido atribuidos a los tiosulfinatos, siendo la allicina el más abundante. La determinación rutinaria de la allicina es dificultosa dada su inestabilidad y la naturaleza reactiva de la misma. El objetivo del trabajo fue obtener un estándar secundario para la cuantificación de allicina mediante Cromatografía Líquida de Alta Resolución (HPLC). Fueron ensayadas diferentes metodologías de síntesis y purificación de allicina. En el Laboratorio de Residuos Tóxicos de la Fac. Cs. Agrarias (UNCuyo), bajo condiciones controladas, se preparó polvo de ajo para ser utilizado como estándar secundario de cuantificación. La cuantificación de muestras problema contra ambos estándares (allicina pura y polvo de ajo estandarizado, respectivamente) no presentó diferencias significativas. El empleo de polvo de ajo estandarizado ofrece una alternativa viable simple para la cuantificación de allicina.

Grain size composition of 275 sediment profiles from the Arctic seas

This data set contains grain size analyses of bottom sediments collected by scientists from the V.P. Zenkovich Laboratory of Shelf and Sea Coasts (P.P. Shirshov Institute of Oceanology, Russian Academy of Sciences) during the Project ''Arctic Shelf of the Eurasia in the Late Quaternary'' in a number of expeditions to the Barents, Kara, East Siberian and Chukchi Seas on board the research vessels R/V Professor Shtokman, H/V Dmitry Laptev, H/V Malygin, and icebreaker Georgy Sedov since 1978. The analyses have been carried out according to the methods published by Petelin (1967) in the Analytical Laboratory of the P.P. Shirshov Institute of Oceanology. Archiving and electronic publication was performed through a data rescue by Evgeny Gurvich in 2003.

Mineral composition of 356 sediment profiles from the Arctic seas

This data set contains the mineralogical analyses (binocular counting) of the 100-50 µm grain size fraction from bottom sediments collected by scientists of the V.P. Zenkovich Laboratory of Shelf and Sea Coasts (P.P. Shirshov Institute of Oceanology, Russian Academy of Sciences) during the Project ''Arctic Shelf of the Eurasia in the Late Quaternary'' in a number of expeditions to the Barents, Kara, East Siberian and Chukchi Seas on board research vessels R/V Professor Shtokman, H/V Dmitry Laptev, H/V Malygin, and icebreaker Georgy Sedov between 1978 and 1990. The analyses have been carried out according to the methods published by Petelin V.P. (1961) in the Analytical Laboratory of the P.P. Shirshov Institute of Oceanology. Archiving and electronic publication was performed through a data rescue by Evgeny Gurvich in 2003.

Chemical composition of 169 sediment profiles from the Arctic seas

This data set contains chemical composition of bottom sediments collected by scientists from the V.P. Zenkovich Laboratory of Shelf and Sea Coasts (P.P. Shirshov Institute of Oceanology, Russian Academy of Sciences) during the Project ''Arctic Shelf of the Eurasia in the Late Quaternary'' in a number of expeditions to the Barents, Kara, East Siberian and Chukchi Seas on board research vessels R/V Professor Shtokman, H/V Dmitry Laptev, H/V Malygin, and icebreaker Georgy Sedov between 1978 and 1990. The analyses have been carried out in the Analytical Laboratory of the P.P. Shirshov Institute of Oceanology. Archiving and electronic publication was performed through a data rescue by Evgeny Gurvich in 2003.

Biochemical markers and contact lens wear

The project objective was to develop a reliable selection procedure to match contact lens materials with individual wearers by the identification of a biochemical marker for assessment of in-eye performance of contact lenses. There is a need for such a procedure as one of the main reasons for contact lens wearers ceasing wearing contact lenses is poor end of day comfort i.e. the lenses become intolerable to the wearer as the day progresses. The selection of an optimal material for individual wearers has the potential benefit to reduce drop Qut, hence increasing the overall contact lens population, and to improve contact lens comfort for established wearers. Using novel analytical methods and statistical techniques, we were able to investigate the interactions between the composition of the tear film and of the biofilm deposited on the contact lenses and contact lens performance. The investigations were limited to studying the lipid components of the tear film; the lipid layer, which plays a key role in preventing evaporation and stabilising the tear film, has been reported to be significantly thinner and of different mixing characteristics during contact lens wear. Different lipid families were found to influence symptomatology, in vivo tear film structure and stability as well as ocular integrity. Whereas the symptomatology was affected by both the tear film lipid composition and the nature of the lipid deposition, the structure of the tear film and its stability were mainly influenced by the tear film lipid composition. The ocular integrity also appeared to be influenced by the nature of the lipid deposition. Potential markers within the lipid species have been identified and could be applied as follows: When required in order to identify a problematic wearer or to match the contact lens material to the contact lens wearer, tear samples collected by the clinician could be dispatched to an analytical laboratory where lipid analysis could be carried out by HPLC. A colorimetric kit based on the lipid markers could also be developed and used by clinician directly in the practice; such a kit would involve tear sampling and classification according to the colour into "Problem", "Border line" and "Good" contact lens wearers groups. A test kit would also have wider scope for marketing in other areas such as general dry-eye pathology.